|
|
|
San Diego Chapter Officers
|
|
|
picture |
 |
President
|
Vice President
|
|
Bob
Grifftih, C.I.D.+
- Bob Griffith ... description
|
Kelly Nace C.I.D.+ - Kelly has more than 20 years of PCB
Design experience. He holds a BSEE Degree from Purdue University
and ASEET from ITT Technical institute. Kelly received his CID
in 2000 and his CID+ in 2004. He is an active member of the IPC
Designer’s Council. His company CADKraft Engineering has been
servicing the San Diego Engineering Community since 1994,
specializing in RF Layout and High-Speed Digital Designs.
CADKraft also provides Circuit Design and Schematic Capture
services. Kelly has two children, Niklas and Taryn and two
grandchildren, Caden and Madison. He enjoys Sport Fishing,
Muscle Cars, Barbequing, and Gardening of Hot Chili Peppers. He
makes his home in Encinitas, CA. |
|
|
 |
 |
Education
Officer
|
Treasurer |
|
Leslie Gomez,
C.I.D.+
- Leslie has been a PCB Designer over 20 years. Leslie received her CID in
Feb 2000. She has been a member of the IPC Designers Council since
1999. She held the office of Treasurer for
the San Diego Chapter in 1999 and 2000. Leslie was elected to the office of President
on May 24th, 2000. Leslie has worked with RF, Analog Circuits,
High Speed Digital and Power supplies. Her hobbies include Sport fishing
and Fitness. Current studies are in exercise science. Leslie
also does PCB design for her own company on a contract basis. Leslie makes her home in Cardiff,
California.
|
Bill Gebhardt,
C.I.D.+
-
Bill has been a PCB Designer since 1991 and has
been a member of the IPC Designers Council since October 1999.
He received his CID in February 2000, volunteered shortly afterwards to help the
San Diego Chapter become more beneficial to its members and in
May 2000, became Treasurer. Bill does primarily Digital design with some Analog
and mixed signal design. He is happily
married with 3 grown children (no grandkids yet), loves to play
softball, entertain friends, barbecuing, relaxing at home and
being entertained by his two dogs and 3 cats. His aspirations
is learning sign language to help minister to the deaf community. Bill makes his home in Murrieta, CA.
|
|
Picture
Communications Officer
Ben Savage, - Ben
Savage .... description |
Web Manager
Bill
Brooks, C.I.D.+- Bill has been a PCB Designer for
over 34 years. He has a broad background in PCB Design including
Digital, Analog, RF, Microwave, and power circuits. He joined
the IPC Designers Council in March 2000. Bill received his CID
certificate in Aug of 2001 and his C.I.I. in March of 2002. Bill
has been on the San Diego Chapter Board since May 24th, 2000.
In addition to his current responsibilities he serves on several
IPC committees and teaches PCB Design at the local community
college. Bill works for Datron World Communications,
Inc. in Vista, Calif. Bill's hobbies are computers, Classic
Chevy cars, flying and HAM radio. Bill has his own website in
addition to managing this one at
PCBWizards.com. Bill makes his home in Vista, Ca.
wbrooks@dtwc.com
(760) 597-1500 |
|
|
|
|
