-YOU ARE INVITED TO ATTEND-

San Diego Chapter of the IPC Designers Council is pleased to present the following:

Thursday Nov 17th, 2005

@ 6:00PM

Carol Burch, Sr VP
of
Thermalworks

presenting

"Properties and Printed Circuit Board Applications for Carbon Composite Laminate (Stablcor)"

&

Greg A. Mattis
of
Winonics Inc.

presenting

Design for Manufacturability (DFM) as a process sequence

and

Current assessment of material choices for “No Lead” Printed Circuit Board applications

MARK YOUR CALENDAR!!!

Stablcor Carbon composite laminate (CCL) technology is used for conduction cooling in printed circuit boards and integrated circuit substrates. It is electrically and thermally conductive and acts like a heavy copper layer in a printed circuit board without the high CTE expansions and weight premiums.

Greg A. Mattis, Business Development Manager of Winonics Inc. Approx. 25 years in the Electronics industry. Over the last 23 years Greg has been primarily involved with printed circuit board sales, manufacturing, and design. Greg was Dir Sales & Marketing with Ambitech (6 years) (Military & commercial extreme technology PCBs). With McCurdy Circuits, Greg was both VP of Sales & Marketing as well as Sr VP in charge of all manufacturing operations for (7 years) high end commercial PCB,s. While with Korean Circuits America (KCA) Greg was both VP of Sales & Marketing as well as General Manager in charge of all manufacturing operations for (3 years). Greg was a member of the IPC Designers Council for two years and taught a segment of a course for 'High Speed Design' at PCB Design West.

Meeting Agenda:

	6:00PM - Dinner (Dinner is sponsored by Winonics Inc.)
	6:45PM – Announcements and Introductions
	7:00PM – Presentation
	8:00PM – Q&A
	8:30PM - Adjourn

Hosted by the San Diego Chapter of the IPC D esigners Council

This event will be held at:

3755 Murphy Canyon Road,
Suite S.
San Diego, CA 92123
Phone: (858) 278-6988

Get Directions

Click the link above for directions.

RSVP to mailto:bbrooks@dtwc.com by Wednesday, Nov 16th, 2005.

IPC Designers Council Members will be admitted free of charge, Non-Members will be asked to contribute a $5.00 donation at the door. Contributors will get a $5.00 discount applied to their membership should they decide to join the IPC Designers Council at the event.

More information about the IPC Designers Council is available on-line at http://www.ipcdesignerscouncil.org or http://dcchapters.ipc.org/SanDiego

SDDC Meetings and Events

Thursday Nov 17th, 2005

Carol Burch, Sr VP of Thermalworks

&

Greg A. Mattis of Winonics Inc.

Carol Burch, Sr VP
of
Thermalworks

Greg A. Mattis
of
Winonics Inc.